German Spanish French Hungary Italiano Russian Swedish English blank
Menu Changelog section Back to Homepage
Version 0.9.6

if no profile was imported at kvpnc profile import keep profile name at profile selector fixed

remote id toggle at newprofilewizard at *swan use fixed

remote id options at newprofilewizard at *swan use fixed

local id options at newprofilewizard at *swan use fixed

split specific options at preferencesdialog in multiple tabs (*swan, racoon, pptp, openvpn) for reducing preferencesdialog size (kde3: #13610, kde4: #219556)

vpnc config options if ca cert or ca dir empty for use hybrid mode fixed (thanks to Todd Kennedy)

enable psk options at hybrid mode fixed (vpnc)

selecting profile selects not right profile fixed [kde4]

openvpn specific options toggle fixed [kde4]

crash at p12 certificate import fixed [kde4]

p12 import at openvpn profile import fixed [kde4]

crash at generate openvpn key fixed (#224507) [kde4]

remote network netmask at newprofilewizard at *swan use fixed [kde4]

use udp label text at newprofilewizard at *swan use fixed [kde4]

check if profile already exists at kvpnc profile import added

toggle all/none profiles at kvpnc profile import added

user defined import prefix at kvpnc profile import added

kde4 translation updated

Version 0.9.5

use nat fixed (vpnc)

vpnc config option for use hybrid mode fixed

hide useless cisco cert comboboxes if not needed

use nat at pcf import fixed

cancel at pcf import if profile name already exists fixed

parameter at log message fixed (openvpn)

bool options fixed at kvpnc profile import

wrong label (before disconnect) in preferencesdialog fixed [kde4]

HTTP Proxy Authtype at kvpnc profile export fixed

auth type at kvpnc profile export fixed

hide ipsec virtual ip options at newprofilewizard (openvpn)

crash at connecting fixed (openvpn)

keeping existing nameserver fixed (openvpn)

memleak fix (vpnc)

vpnc start fix [kde4]

some vpnc kill fixes

fixes regarding indexes of comboboxes in preferencesdialog [kde4]

displaying auth type at change in preferencesdialog

authtype display at profile change fixed

display add/remove additional network routes fixed

use default interface at add/remove additional network routes if no device is given

hybrid mode at preferencesdialog fixed (vpnc)

save CertPath at preferencesdialog fixed (racoon)

if profile name with spaces is entered at newprofilewizard dont continue fixed

use nat preselection at newprofilewizard fixed

udp port toggle at newprofilewizard fixed

default route combobox at newprofilewizard fixed [kde4]

index fixes at newprofilewizard [kde4]

crash at connecting state fixed (openvpn)

save username if username/password from authdialog is requested save is checked (openvpn)

dont display authdialog if userdata already collected (openvpn)

memleak fix (openvpn)

crash at newprofilewizard at ssh type on tunnel type change fixed

use cisco icon instead pcf icon in for pcf menu entry

kde4 translation updated

Version 0.9.4

rsa key auth at ipsec config file import fixed

rsa key auth for psk fixed (*swan)

psk at ipsec config file import fixed

connect success status message at *swan fixed

cert path within inline cert at openvpn config file import fixed

possible crash at displaying dock tooltip at disconnected state fixed

displaying Openswan/strongSwan/FreeS/WAN import entry in profile menu fixed

ipsec config file import fixes

crash at disconnect in connecting state fixed (racoon)

cancel at fritzbox vpn user config file import fixed

removing virtual ip address at disconnect on connecting state fixed (racoon)

adding virtual ip at connecting state fixed (racoon)

http proxy widget at preferencesdialog fixed

crash at connecting fixed (*swan)

virtual ip fixes (*swan)

phase 2 quickmode detecion fixed (*swan)

make gui not freezing if module loading/unloading

(rare) race condition on ipsec start fixed

psk mode at l2tp fixed (*swan)

debug level for racoon fixed

auth type on authtype change at preferencesdialog fixed

remoteid type fixed if empty

temporary static klips debug removed

toggle of remoteid type fixed if none

rightsourceip at *swan fixed

crash at connect (rare cases) fixed

psk auth type fixed on loading profiles

racoon debug level at preferencesdialog fixed

dh group at racoon fixed

export date at kvpnc profile export fixed

nat option fixes

xauth at ipsec fixed if strongSwan is used and psk is in file

psk on ipsec fixed if openswan is used

ipsec flavour parsing fixed

changing auth type fixed

mru checkbox in profile settings fixed

pptp auth options fixed

handle reject auth at ssh fixed

check existing profile name at new profile creation fixed

crash after delete profile fixed

crash after delete last profile from preferencesdialog fixed

creating new profile saved with old data when called from preferencesdialog fixed

hang at vpnc connect fixed

lineend at some vpnc debug messages fixed

pptp crash fixes

openvpn config option fixes

openvpn version checking for script security parameter fixed

saving changed profile settings after autofix fixed

crash on connect via openvpn fixed

reconnect on connection lost at pptp fixed

private key password use toggle fixed at importcertifcate dialog

local id at profile creation (racoon) in newprofilewizard fixed

certificate import button on certificate profile page fixed

crash at disconnect on connecting state fixed (openvpn)

crash at disconnect on connecting state fixed (pptp)

resolv.conf restore after disconnect if no resolvconf installed fixed

connect success event display fixed [kde4]

dock tooltip fixed at disconnected state [kde4]

add virtual ip at connecting state fixed (racoon) [kde4]

connect status alignment in statusbar fixed [kde4]

sorting order at toolsinfodialog fixed [kde4]

initial size at toolsinfdialog fixed [kde4]

sorting order at vpntypesinfodialog fixed [kde4]

initial size at ciscocertificateenrollmentdialog fixed [kde4]

endless loop at killing pptp fixed [kde4]

help for esp parameter at *swan options fixed [kde4]

memory leak at module loading/unloading fixed [kde4]

sorting at comboboxes fixed [kde4]

leftsourceip at virtual ip options fixed [kde4]

rightsourceip at virtual ip options fixed [kde4]

auto reconnect on disconnect fixed (pptp) [kde4]

saving state of ping check checkbox fixed [kde4]

typo fixes [kde4]

fixes regarding kwallet [kde4]

displaying empty pages fixed (#221506) [kde4]

crash at connecting at ssh vpn fixed [kde4]

save only one profile fixed [kde4]

disconnect ssh slots on disconnect fixed [kde4]

error handling at certificate import fixed [kde4]

crash after delete last profile from preferencesdialog fixed (#221635) [kde4]

creating new profile saved with old data when called from preferencesdialog fixed (#210448) [kde4]

translation parameter fixes [kde4]

crash at lost connect fixed (pptp) (#208065) [kde4]

crash at disconnect on connecting state fixed (pptp) (#207786) [kde4]

resolv.conf restore after disconnect if no resolvconf installed fixed (#206211) [kde4]

up/down scripts removed at openvpn config file export

local id at psk on *swan fixed

using /etc/init.d/ipsec stop for stopping openswan because ipsec setup stop doesnt cleanup all

local/remote id types fixed (racoon)

hybrid detection display in toolsinfo dialog fixed

hybrid mode at preferencesdialog fixed (vpnc, vpnclient) [kde4]

save only new profiles at ipsec config file import

ipsec error handling improved

support for inline certificates (user certificate, ca certificate, private key, tls-key) at openvpn config file import added (see doc/README.OPENVPN_INLINE_CERT)

importing username by special line at openvpn config file import added (# OVPN_ACCESS_SERVER_USERNAME=)

hide ipsec related settings at virtualip options page if not nessary

cpu usage reduced

dock tooltip better formatted

eventsrc updated

stop connecting if hostname could not resolved at racoon profile

displaying virtual ip address in tooltip added (*swan, racoon)

dhgroup for esp added (*swan)

filter for fritzbox vpn user config file changed to "vpnuser_*.cfg"

dont use "VPN connexion established" as successful connect at racoon

useless netmask removed at setkey rules

temporary static rightid removed at *swan

useless http proxy options on racoon usage disabled

user options on racoon usage disabled if not xauth or l2tp

fritzbox vpn user config file import added

save single profile at additionally to config sync

racoon virtual ip support added (use LeftSourceIP)

debug options for pluto and klips added (*swan)

remote id moved from cert options to ipsec/racoon options

checking gre support at pptp added

load ip_gre module if nessary at pptp

display profile info in profile selector tooltip added

not useable mppe and ppp options now disabled at l2tpd profile

l2tp auth at profile selector tooltip for l2tp profiles added

save only current profile instead of all if passwords got from dialog during connecting

messagebox for user added if connection was refused at pptp connect try

tun device check more reliable made

allow hostname instead of ip address in ping check too

ciscouserca type at importcertifcate dialog added (user + ca certificate)

certificate will now imported into cisco cert store if set in config file

use cisco cert store option at certificate settings at orig cisco usage added

importing a pcf file containing certificate will now import the certificate too (file/cert store is selected by CertStore option in pcf file)

certificate select dialog now show also certs with der extension

hybrid support detection at vpnc added (openssl support compiled in)

hybrid mode (ca cert and name/password) added (vpnc, vpnclient)

ca certificate import at importcertifcate dialog added

"use NAT" option added (split "use UDP" into "use UDP" and "use NAT" for more flexibility)

process only events if needed at getting certs from Cisco cert store

debug output for replacing defaultroute added (vpnc)

display other informal msg from ipsec helper too [kde4]

read only first ip address from interface at getInterfaceIP

clear text password from config file removed (workaround found) [kde4]

add userpage at pcf import on new profilewizward disabled [kde4]

set default network protocol to tcp at openvpn profile import

use file select dialog instead of textinput dialog for getting filename at openvpn config file export

id type tooltips at remote/local id comboboxes added

netstat toolinfo display added

certificate prefix can now specified at openvpn type

Version 0.9.3

--non-inter option removed because no longer nessary

useless extra route disabled

resolvconf fixes

creating additional route with /32 mask fixed

crash on wrong import password on p12 certificate fixed

certificate import p12 fixed

keeping default route fixed (pptp)

crash at import ipsec config fixed (#205502) [kde4]

displaying values in importprofiledialog after importing ipsec config fixed [kde4]

enterxauthinteractivepasscode layout fixed [kde4]

ppp auth method in preferencesdialog fixed [kde4]

ask username/password only if needed fixed (pptp) [kde4]

cisco nat mode saving fixed [kde4]

dialog change detection in preferencesdialog fixed [kde4]

ProfileCmdExecAfterDisconnectSelector on preferencesdialog fixed [kde4]

ProfileSpecificSelector on preferencesdialog fixed

icon size on daemon options fixed [kde4]

icon size on helper program options fixed [kde4]

export kvpnc profiles fixed [kde4]

filename select on kvpnc profile import fixed [kde4]

check cisco_cert_mgt tool before running the wizard added

allow empty certificate password on vpnclient

qt3 compat usage removed in kfeedbackdialog [kde4]

import/export profiles now checkable (instead of select) [kde4]

Version 0.9.2

crash on exec cmd after disconnect fixed

path to tail after change in profilemanger fixed

save modified path of tail, ciscocertmgr fixed

deleting profile fixed [kde4]

crash at smartcard options widget fixed [kde4]

selector on authentication page fixed [kde4]

gui freeze eleminations [kde4]

username display on status fixed (openvpn) [kde4]

use remote network changing on profilenetworkgeneraloptions fixed [kde4]

replace custom bug report entry with homepage call entry [kde4]

profiletype on profilemanger fixed [kde4]

interface detection fixed [kde4]

racoon specific page moved to connection specific in profilemanger [kde4]

restoring last profile fixed [kde4]

echo mode on import certificate dialog fixed [kde4]

echo mode on psk options dialog fixed [kde4]

echo mode on cisco manually dialog fixed [kde4]

manageciscocert dialog fixed [kde4]

read profile data fixed (pcf file) [kde4]

crash on openening profilemanger fixed [kde4]

wrong profile name on pcf import fixed if name still exists

fixes regarding dns update

saving cisco nat mode fixed

ipsec setup fix

rename to empty name fixed

memory leak fixes

vpn type in import/export fixed

vtun path on preferences dialog fixed

ssh path on preferences dialog fixed

script-security option fixed (openvpn) thanks to Thomas Bartschies

mtu/mru options at preferences dialog fixed (openvpn) thanks to Thomas Bartschies

dns update fixed (openvpn) thanks to Thomas Bartschies

TlsRemoteHostCheckBox fixed

renegsec option fixed (openvpn)

ask user password on each connect option added

HOME/bin now in search path of default paths

default paths search order changed

useless comment on tail info removed

DNS_UPDATE option renamed to Update DNS configuration, if not checked, /etc/resolv.conf will not changed

ping_check.sh now useable with ash

ping_check.sh device parameter added

connection status check now uses tunnel device

translation update

empty patch checking on load/save added

detecting pkcs11 ids for openvpn via openvpn added

option for selecting open profilemanger after import added

pkcs11 parameters changed for openvpn >= 2.1rc-9

openvpn version detection improved

pkcs11 token support for other than etoken added

dns domain added for pptp

kde3 type in version added





Version 0.9.1

disconnect on kde shutdown fixed

icon state on vpntypesinfo dialog fixed

typo fixes

quick connect fixed

crash on close fixed

dpd idle timeout fixed (vpnc)

quick connect fixed

dns server and dns domain on newprofilewizard fixed (pptp)

hotfix for restoring resolv.conf (pptp)

disconnect on kde shutdown fixed

resolvconf call in upscript fixed (openvpn)

auth type fixed on kvpnc profile file import (openvpn)

default route replace fixed (pptp)

selector update fixed (vtun, ssh)

tunnel interface ip on tap mode in tooltip fixed (ssh)

crash on gnome-ssh-askpass use fixed

version info on for vtund fixed

some options work only in udp mode fixed (openvpn)

username, password fixed on pptp

pptp on preferencesdialog fixed

authentication type sync fixed

racoon id fixes

hash algo fixed (racoon)

connect success status msg fixed

virtual interface on mode config fixed (racoon)

xauth fixes (racoon)

peers identifier type fixed on racoon

hybrid on racoon fixed

crash at manageciscocert dialog fixed

virtual ip fixes (ipsec)

displaying cisco cert fixed

username/password auth dialog on ipsec fixed

ipsec start fixed

credits fixed

resolvconf on openvpn fixed

typo fixed on export xml

local id, remote id fixed on psk (*swan)

xauth password dialog fixed

exchange mode fixed

ipsec whack --status output fixed

tls-auth fixed on openvpn

racoon l2tpd fixed

adding additional network routes fixed (if no device given)

authentication problems with l2tp fixed

hideOnCloseInfo fixed

pppd mppe check fixed

remote network fixed in preferencesdialog (raccon)

psk save fixed on newprofilewizard (vpnc manually)

username in tooltip fixed

username fixed after reenter (vpnc)

default route fixed (freeswan)

restoring default route fixed (pptp)

remote id type fixed (newprofile wizard)

racoon algorithms fixed

psk file permission fixed (racoon)

userdefinied dns server fixed (pptp)

dns server fixed (pptp)

diffie hellman group fixed on racoon

freeze if vpnc run directory not exists fixed

ipsec page fixed on l2tp ipsec (newprofilewizard)

remote port fixed on newprofile wizard (openvpn)

replacedefaultroute test fixed

logviewer process refresh fixed

cert and nexthop entries fixed on ipsec file import

detecing gw ip of default interface fixed

psk fixed at openvpn config file import fixed

authentication algorithm fixed (openvpn)

automatic auth inconsistency fix fixed

http proxy options fixed in preferencesdialog

loading tun module fixed on openvpn

certificate import fixed

auth type on ipsec import fixed

default section type handling fixed (ipsec import)

psk secrets file fixed on ipsec import

cert path on ipsec import fixed

private key on ipsec import fixed

ca cert path is disabled at ipsec fixed

resolv.conf restore fixed if dns_update is not set (vpnc)

spelling fixes

ping check fixed (thanks to Konstantin U)

dont save username option fixed

segfault at pptp deamon select fixed

pfs typo fixed

crash after deleteing last profile on closing preferencesdialog fixed

ike and esp parameters fixed (ipsec)

kvpnc profile import fixed

dns_update fixed (really, thanks to Igor Bujna)

netmask at edit network route fixed

dns_update fixed

pcf import at vpnclient fixed

psk in preferencesdialog fixed (*swan)

kde4 port

better formatted remote/port option in generated openvpn config

donate url changed

cmd outputs added: before connect, after connect, before disconnect, after disconnect

more debug output on newprofilewizard (pptp settings)

more status info at preferencesdialog

kvpnc now ask only for user data if not already collected

more debug info on close added

query exit now asks

option for costum ssh remote network script added

required tools check improved (ssh)

network mask on tap mode added (ssh)

other type specific pages now disabled (ssh)

ssh options now really shown if type changed

checking default route count added (pptp)

tunnel device type added in profilewizward (ssh)

tls-auth direction detection in openvpn import added

ssh tool info added

ksshaskpass info added

ssh-askpass-gnome info added

ssh connection type added

tap mode added (ssh)

credits for ansgar added

eap option added pptp

30Eur donation credits added, thanks to Christoph Schmid

ipsec page is now disabled on racoon

getHostname function added in utils

mode config password is now send via stdin instead of psk file

racoon will now stopped correctly if in connection state

hash algorithm description changed to authentication algorithm phase 1

mode config added (racoon)

certificate url requester now hidden on hybrid

hybrid auth type on newprofilewizard added

xauth support addded (racoon)

racoon now uses racoonctl

hybrid mode (ca cert and name/password) added (racoon)

cisco config file import now uses filename instead of groupname

disable bind option added (openvpn)

help link on openswan/strongswan options added

more options on openvpn config file import added: fragement, mssfix, nobind, tun-mtu, reneg-sec, ping, ping-restart

rename menu entry added

better xml import

user feedback on xml import

vpn types info dialog added (shows if all is availiable for an specific vpn)

exchange mode now set always to main if strongswan is used

openswan handling more reliable made

support for openvpn >= 2.1-rc script parameter added

openl2tp will now automaticlly started/stopped

conntect try now really stops if max connect retries reached (*swan)

openl2tp support added

leftsourceip/rightsourceip now in right fields on profile manager

support for virtual subnets (virtual_private) added (openswan/strongswan)

cpu usage reduced on debug console

group password is now hidden on high kvpnc debug level (vpnc)

better status detection of l2tp connect

l2tpd debug modes added (avp, packet, network, state)

better info on killing pptp

tooltip at toolsinfo dialog added

if peer sends an other id as we expect, user can confirm it and reconnect with a click

ipsec config import now understands more options: leftxauthclient, rightxauthserver, keyingtries, pfs, pfsgroup, aggrmode

virtual ip support added (openswan/strongswan)

pppd info in toolsinfo dialog added

userpage is now only added if xauth or l2tp (ipsec)

xauth support on strongswan added

ike and esp settings can manually extended

auth dialog after xauth fail added

made plutostderrlog obsolete (now use ipsec whack)

xauth support on openswan added

better info at delete profile

better formatted output on adding/removing additional network routes

hide group password option in account data dialog added (vpnc,vpnclient)

improved pptp handling

user gets a warning that extra route is needed if no defaultroute to vpn will be set (newprofilewizard)

dpd idle timeout support added (vpnc, vpnclient)

pppd option detection reworked

show password dialog if authentication has been failed (pptp, openvpn)

resolvconf support for openvpn

resolvconf support for pptp

tcp tunnling mode now also possible (original cisco client)

natt now can be disabled (vpnc, original cisco)

tunnling port can be specified on original cisco

local identifier can now be set on raccon

remote identifier can now be set on raccon

if kwallet will be deactivated the user now will asked if really wanted

route page at cisco added (new profilewizward)

checking for tail added

path for tail can be specified

extra routes for pptp added

verify ca cert option added (racoon)

support for strongswan 4.2.2rc5 added (plutostderrlog option)

network routes added in newprofile wizard

ipsec settings rewrite in preferencesdialog

final picture in profilewizward added

mschap auth selection added (pptp)

mschap-v2 auth selection added (pptp)

option for disabling ipx added (pptp)

option for disabling tcp header compression added (pptp)

option for disabling magic number negotiation added (pptp)

option for disabling protocol field compression added (pptp)

option for disabling address/control compression added (pptp)

lzo compression is now disabled by default (openvpn)

kernel level debug option added

use network option added

option for open profile manager after import added

option for ipsec vpn mode (transport/tunnel) added

default mtu/mru added (pptp)

auth selector always active on cert/psk part

duplicate options regarding default route removed

saving network routes also if its deactivated

tun1, tun2, tap0, tap1, tap2 in addroutedialog added

automatic saving options if needed added





Version 0.9.0

nt domain name fixed for pptp

keeping default route on pptp fixed

setting route to vpn server if replace default route fixed

removing additional network routes fixed

connection hangs because no data from management interface was recieved fixed on openvpn

openvpn resolv.conf handling fixed

crash at logviewer dialog fixed

crash at kde shutdown fixed

displaying username in connection status fixed

crash on pptp disconnect fixed

empty pfs fixed (vpnc)

empty dh group fixed (vpnc)

resolv.conf corruption on connecting fixed (pptp)

openvpn smartcard fixes

better vtun error handling

profile saving fixed if profilemanger called

better information for the user at profile saving

resolv.conf restore on openvpn fixed

danish translation added. Thanks to Christiansen for made it.

vpnc disconnect fixed

natt mode none removed from cisco settings (obsolete)

tooltip for natt mode in cisco settings fixed

virtual ip on tap mode for openvpn fixed

tunneldevice type change fixed if virtual ip is disabled

disable tail for freeswan because it doesnt support plutostderrlog

first connect doesnt work fixed (bug #9977)

my_identifier option for racoon added

freeswan/openswan/strongswan config import added

bash test added

use /bin/bash as shell interpreter

export profiles and global settings added

import profiles and global settings added

special chars now replaced with underscore in profile import

cpu usage reduced by improoved duration event

15€ donation credits added, Andreas Diestelmann

30$ donation credits added, thanks to Frank Visconti

patch for setting DNS_UPDATE applied (thanks to Igor Bujna)

restoring route and resolv.conf on connecting state fixed (vpnc)

path for pptp fixed

disable nat-t for vpnc >= 0.4.x fixed

pcf import fixed (udp port)

process environment fixed

local ip address of tunnel is now right shown (pptp)

pptp route problem fixed

pptp is now right terminating

adding/removing additional network routes are now right shown in log

resolv.conf/resolvconf fixes

setting english as environment for processes

virtual ip check in preferencesdialog fixed

xl2tpd detection fixed

ipsec log parsing fixed

vpnc 0.3.2 is working again

removing password entry from pap-secrets/chap-secrets file fixed

psk in file fixed

virtual ip in preferences dialog fixed (openvpn)

reconnect delay fixed

virtual ip entry fixed (openvpn)

cancel at user data dialog fixed

save only profiles after dialog if needed (openvpn)

tunnel interface now better regonized (openvpn)

the network interface now can be manually typed in at addroutedialog

close event for kicker implemented

toolinfo dialog now shows what tool is required on vpn types

extra route for gateway added (pptp)

option for fixing the path mtu problem added (http://pptpclient.sourceforge.net/howto-diagnosis.phtml#connections_freeze)

support for propritary (original) cisco client added

certificate support for vpnclient added

- cert file import

- cisco cert store management

- online certificate request via SCEP

certificate support for original cisco client added

certificate manager for original cisco client added

context menu on route listview added

authentication algorithm now by default disabled (openvpn)

better user info at openvpn

disableDataEncryption for vpnx 0.5.x added

basic support for vtun added

profile import improved

colored log output in logviewer

option for count of lines in logviewer added

searching in logviewer content added

progress bar at loading logfile on logviewer added

debug console now usees qtextbrowser instead qtextedit

pptp debug level renamed to log level

pptp debug option added

virtual ip option in newprofile wizard added

virtual ip option for pptp added

mru settings in network general settings added (for pptp)

mtu and mru settings in network settings at newprofile wizard added

default value for mtu and mru in newprofile wizard changed to 1492

l2tpd parsing enhanced

debug option for l2tpd added

debug option for xl2tpd added

option for selecting natt mode for cisco (vpnc) added

listen detection of already used port improoved

better error reporting at already used port for openvpn

save username, password and psk in enterpassworddialog reworked

pfs and dh group settings moved from advanced settings dialog to cisco and racoon settings

application version and single des option moved to cisco settings

profile saveing time improved

new reject message from vpnc 0.5.0 will now regonized

option for openvpn auth direction added

additional network route can now be modified

made test of replacedefaultroute more reliable

option for userdefinied dns search domain added (pptp)

support for x2ltpd added

x2ltpd will be used if availiable instead of l2tpd

duration in tooltip added

debug output for vpnc config added (if loglevel > 3)

empty ID will now reported and stops connecting (vpnc)

requiremppe128 detection for pppd added

Version 0.8.9

openvpn private key password fixed

private key password dialog fixed

connection time counter fixed

crash at pcf import fixed

ifconfig entry for virtual ip in openvpn config fixed (thanks to Michal Pena)

nt domain name fixed in wizard and profile setting

fix for vpnc 0.4.0 which has changed udp option

openvpn import now copy cert files to kvpnc data dir if not absolute path is given

option for delay before executing command after connect added

tunnel device type selection moved from openvpn options to network general settings

tunnel device type selection for vpnc >= 0.4.0 added

authorization method added: pap (pptp)





Version 0.8.8

connection timeout fixed (cisco)

vpnc-script fix for fc6

tool detection fixed

openvpn import fixes

crash at failed port binding for openvpn management port fixed

vpnc detection fixed

connection status check fixed

racoon fixes

openswan fixes

various small fixes

menu entry for donate money now works if run via kdesu

certificate import fixes

crash on connecting state of racoon fixed

credits for swedish, japanese translators, artworker and bughunter added

on timeout now the user got hints on a messagebox

on profile rename the user can enter new name again after failed because illegal chars entered

if peer uses another cipher and reports that, kvpnc automaticlly fix it (openvpn)

cert and psk settings are spit in seperate widgets

preferences dialog reworked for smaller size

http proxy is now splitted from openvpn settings

pkcs11-tool added to helper programs

user data can now entered at wizard (cisco)

option to change background color for debug console added

kvpnc now only asks for passphrase if private key is protected with a passphrase

openvpn import now asks for username and password if auth is requested in import file

if peer uses another tunnel type (tun/tap) and reports that, kvpnc automaticlly fix it (openvpn)

if peer uses another authentication algorithm and reports that, kvpnc automaticlly fix it (openvpn)

better freeswan/openswan/strongswan detection

kvpnc now shows the ipsec type (openswan, strongswan, freeswan)

float option for allowing change of peers ip address added (openvpn)

default authentication algorithm is now set to MD5 (openvpn)

option for hide at startup added

automatic backup of kvpnc config added

automatic restore of network routes, resolv.conf and config added

smartcard support added

options for authentication and encryption algorithms added (racoon)

l2tp support added

menu entry for reporting bugs added

feedback mail report added

option for authentication algorithm added (openvpn)

option for killing still running racoon (if not from kvpnc started) added

option for killing still running l2tpd (if not from kvpnc started) added

default route option now moved to network - route

dcop functions added:

  • void doSendFeedbackMail()
  • QStringList getProfileTypes()
iptables support for racoon added

nt domain name for authentication added (pptp)





Version 0.8.7

disable of getting dns from peer now works (pptp)

path for pkcs12 file on certificate import within the wizard fixed

pptp fixes

chap-secrets will now be cleaned up rightly

if specified, special path for external programs will be now used

pcf import crash fixed

vpnc will now right killed at disconnect

openvpn import now moves cert files to right place

openvpn now works if only a ca cert is set

terminating openvpn process no only kills the from kvpnc started

profile selection now works in all profile settings

NT Domain name for authentication added (pptp)

support for missing replacedefaultroute at old pppd added

userdefinied mtu for cisco added

support for ca cert and user authentication (openvpn)

changed info for daemon programs will now shown directly after change

Japanese translation added. Thanks to Yukiko Bando who has made it

http proxy auth for openvpn added

Version 0.8.6.1

restoring default route at cisco connection fixed

typo fix for openvpn tunnel device type

comments are now removed from config lines on openvpn import

crash at rename fixed

pcf import fixed

resolv.conf restore problem fixed (vpnc)

vpnc config is now send via stdin





Version 0.8.6

openswan detection fixed

crash on close if 'don't quit by clicking close button' is enabled

cancellation of openvpn profile import fixed

cancellation of pcf file import fixed

disabling udp now sets right option for vpnc

crash on disconnect fixed

openvpn import fixes

small pptp fixes

displaying ip address in tooltip of kicker icon fixed (openvpn)

openvpn certificate search path is now /etc/openvpn if not specified

connection time will now counted correctly after reconnect

pptp debug level fixed

fixed name in pcf import

pcf import now reads pcf files which contain ! at beginning

credit for Marcin Prejsnar added

openvpn now controlled via management interface

dns names are now resolved by libresolv instead of qdns

network interface class use much less qprocess for better event handling and better speed

program and pid detection for given port added

kvpnc gives now a hint which program is using listening port if port bindung failed

support for xauth interactive added

openvpn pkcs11 support (thanks to Alon Bar-Lev)

dcop options added: doImportPcf(QString file), doImportOpenvpnConfig(QString file)

command line parameters added: --openvpnimport, --ciscoimport

option for disabling ccp negotiation added

vpnc will now used in non interactive mode because reading from console is broken in vpnc





Version 0.8.5.1

loading mppe module now handles other special case

Version 0.8.5

vpnc script generation fixed

libcrypt detection fixed

vpnc output parsing fixed

option for peer timeout added

pcf import now uses peer timeout

debug output of kvpnc > 1 shows now the vpnc arguments

log file is now synchronized written

copy action for debug output added

process handling improved

userdefinied packet size added (openvpn)

userdefinied packet size for fragmentation added (openvpn)

network interface handling improved

Version 0.8.4

ipsec.conf and ipsec.secrets will no longer overwritten

back behavior in newprofile wizard fixed

aggressive mode fixed (freeswan)

psk for freeswan fixed

starting connection after setup fixed

resolv.conf will no longer changed if no nameserver is retrieved/entered (pptp)

additional network routes fixed

disabling kwallet fixed

crash at close on empty profile list fixed

openvpn hangs on connecting fixed

window size and position storing fixed

hide on close warning dialog fixed

directory mode for certificate path in new profile dialog fixed

tab sort order dialogs fixed

udp option in preferences dialog for openvpn fixed

tls auth in newprofile wizard fixed

path for p12 certificate at openvpn import fixed

displaying certificate entries in profile manager fixed

password dialog for openvpn fixed

push options for openvpn fixed

connection status check options for openvpn fixed

some fixes around newprofile wizard

vpnc connect script fixed if no resolconf is used

openvpn user authentication fixed

*.crt for filter added

openvpn now looks in cert path for certificates

option for disabling pfs added (freeswan)

verbose option for ipsec added

automatic detection for ipsec.* files added

automatic killing ipsec if not started from kvpnc at connect

tunnel ip now shown for pptp and openvpn

option for left and right next hop added (freeswan)

option for disabling opportunistic encryption added (freeswan)

patch for skip focus to password if username already cached (thanks to Tim Wootton) added

name will now checked if profile from wizard was imported

agressive mode for freeswan/openswan added

Version 0.8.3

info that process was killed is shown multiple times fixed

key shortcut menu entry fixed

more ui freezes eleminated

remote network storing fixed (pptp, OpenVPN)

crash at preferencesdialog after deleting profile in it fixed

retrieving username and password from enterpassworddialog fixed

output for connection status check fixed if userdefined ip address is used

wizard for creating new profile added

support for TLS remote host for openvpn added

support for pushed options (dns, domain) for openvpn added

ping IP address after connect (obsolete) removed

use userdefinied ip address for connection status check added

delay for auto reconnect added

patch for splitrules applied (thanks to Tilman Vogel)

auth retry after failed password for openvpn added

keep default route for pptp added

ike exchange mode for racoon added

option for dont save username added

openvpn config file import added

new dcop functions

  • doImportOpenvpnConfig
  • createNewProfileWithWizard
tls auth option for openvpn added

http proxy support for openvpn added

userdefinied ciphers for openvpn added

redirect gateway option for openvpn added

automatically adding ppp-compress-18 alias to /etc/modprobe.conf

automatically try to load ppp_mppe instead of ppp-compress-18

automatically detection of mppe style

toolinfo now collects info about pptp

option for debug level of pptp added

more tooltips added

information of deamons now shown in preferencesdialog

Swedish andbook added. Thanks to Daniel Nylander who has translate it.





Version 0.8.2.1

crash at preferencesdialog fixed

Version 0.8.2

virtual ip fixes (OpenVPN)

duplicate settings entry removed

non profile related entries moved to kvpnc menu

GUI fixes in preferencesdialog

crash at profilemanger if profile list is empty fixed

refuse eap option fixed

PPTP handling fixed. thanks to E-SpArK

command execution fixed

usenoipdefault fixed

certificate import for DER format fixed

group password in enterpassworddialog fixed

quit at dock fixed

crash at disconnect fixed

last profile fixed if profile list is empty

tunnel IP address in tooltip fixed (vpnc)

helper tools info now shown in helper tools settings

german translation at eventsrc added

ping test now only started if not running

preserving at startup and restoring at quit for /etc/resolv.conf added

preserving at startup and restoring at quit of default route added

toolinfo now collects info about ip, ifconfig, route

OpenVPN user authentication added

handling for fixing multiple default routes added

network tests added

  • getgatewayofdefaultinterface
  • getgatewayofinterface
handling for fixing multiple default routes added

network interface class now use log output mechanism instead of stdout/stderr

option for allowing empty group password (vpnc) added

Svedish translation added. thanks to Daniel Nylander

chap-secrets will no longer overwritten

option for disabling the use of kwallet added

require mppe and disable 40 Bit now set as default

restoring old default route and resolv.conf if vpnc was unexpected running

cisco password decoder now uses libgcrypt (thanks to Maurice Massar)

more debug output for certificate import added

automatic directory creation for certificate dirs added

date and time stamp in logfile added

if password is empty after import saving password now disabled





Version 0.8.1

group password in enterpassworddialog fixed

if password is empty after import saving password now disabled

quit at dock fixed

default value for keeping default route changed to false

crash at disconnect fixed

last profile fixed if profile list is empty

tunnel ip in tooltip fixed (vpnc)

config file corruption fixed

refuse eap option non-action fixed, thanks to loic pfefferkorn

internal cisco decoder added. thanks to hal9000

missing ui file added

pcf import gives a warning if vpnc is not installed

automaticlly loading kernel modules (esp4 and ah4) for racoon added

handbook updated

translations updated

more tooltips and whatsthis tips

option for disabling lzo compression on openvpn added

Version 0.8

kvpnc hangs on pcf import fixed

fixes around delete profiles

better status for actions

crash at closing preferences dialog fixed if profile list is empty

profile renaming now forbids blanks in new name

profile list for autoconnect after profile renaming fixed

quick connect menu after rename profiles fixed

actions now disabled during connecting/connected: import pcf, import cert, add, delete

decoding group password for pcf import fixed

import ikegroup and local port from pcf file fixed

debian related changes - thanks to Loic Pefferkorn

tool detection and enabling connect fixed

vpnc script creation fixed

desktop link updated - thanks to Loic Pefferkorn

connect button now enabled at startup

crash at rename fixed

remote network in new profile dialog for pptp fixed

rename and delete of profiles fixed

ping ip after connect fixed

size of toolinfo dialog fixed

setting hostname as gateway fixed

executable not found if there still exists fixed

default mppe options for pptp fixed

racoon detection fixed

retrieving interface address fixed

parsing racoon output fixed

nat-t for racoon fixed

cert import fixed

more credits added in about dialog

automaticlly loading kernel modules (esp4 and ah4) for racoon added

more tooltips and whatsthis tips added

option for disabling lzo compression on openvpn added

openvpn key generation added

dcop function added: toolinfo (returns information of external tools)

connection status check added

auto reconnect after connection lost added

catalan translation added. Thanks to Marc Serra Romero who has done it

support for explicit nsCertType added

profile manager shown after pcf import

check for empty gateway at connect time added

description of profile added

option for saving username, psk and password from enter username+password dialog added

save user password will be checked if password is given in user password field at new profile dialog

save group password will be checked if group password is given in group password field at new profile dialog

import nat setting from pcf file added

option for keeping default route on vpnc use added

special remote id for racoon added

remote network route over gateway added

preferences & profile manager dialog redesigned for better usability

userdefinied port for openvpn added

toolinfo now looks into userspecified path and shows info if it if found

handbook updates

detection for first time use of kwallet added, now reading from config file in this case

tun/tap selection for openvpn added

password storing by use of kwallet added

check for certificate file added

all errors shown by dialogbox now written to log file

name resolving for raccon added

debug output font size can now be set

connecting stops now if required tool was not found

Version 0.7.2

workaround for vpnc 0.3.x if /etc/vpnc/default.conf exits

default values for new profiles fixed

Version 0.7.1

workaround for vpnc 0.3.3

Version 0.7

processing "ip route" output with fix_ip_get_output fixed (thanks to Sebastian Frei)

arguments for connecting msg fixed (thanks to Witek Strzelczyk)

vpnc settings not save in profile widget fixed

saving of use udp protocol fixed

slot for UDP port in profile dialog fixed

port range for NAT-T fixed

kernel module name for loading renamed from 'ppp_mppe_mppc' to 'ppp-compress-18' (ppp_mppe_mppc is an alias for it)

FreeS/WAN 2.x conf generation fixed (obsolete options no longer used)

getdefaultinterface(), getinterfaceip() and getinterfaceforip() fixed

kvpnc debug level fixed

getdefaultnetworkdevice fixed

various fixes around debug output

resolv.conf handling for vpnc fixed

vpnc: fix DNS support in generated scripts (look vpnc patch)

nat-t for racoon fixed

storing of command execution setting fixed

parsing of vpnc output now regnonize wrong group password

reconnect if password, username or group password failed by showing enter account data dialog added

special chars on description from pcf profile will now replaced and simplified to '_'

if username is empty it will also requested by calling dialog

FreeS/WAN conf generation now set from installed version

limited log viewer added

translation updates

all dialogs now use KDialogbase

tool checking added

tool info dialog added

disabling connect button and connect action if bin not found

retrieve dns servers from peer for PPTP added

special userdefinied server certificate option added (FreeS/WAN)

displaying tunnel IP address in tooltip for vpnc added

additional network routes added

ping test for openvpn added

connection type now shown in tooltip and status msg

connecting can now brake

ca certificate field for openvpn added (pem format)

X.509 certificate support for OpenVPN added

option for CA cert in DER format added

global settings moved to config class

NAT-T option moved to network tab in profile manager

the obsolete group password has been removed (preshared key fields will now used)

reorganized profile manager

better gui status for connected

after disconnecting pptp /etc/resolv.conf is will now be restored

automaticlly resolve hostname of gateway (vpnc, freeswan)

support for replace default route for pppd (pppd = 2.4.2) added

connecting can now brake

tool button for debug console added

russian translation added

support for Debian resolv.conf added (vpnc)

Version 0.6.1

option for mtu size of ppp connection added.

import pcf file fixed

connect action now disabled if now profile list is empty

pptp: own dns server fixed

pptp: usepeerdns option fixed

If no profile exists all option which are not nessesary are now disabled

Version 0.6

displaying connection time in nicer form: 00:00:00

KVpnc data diretory creation fixed

kicker menu entries resorted

icons for connect/disconnect/disconnected status changed (but still better icons wanted)

log levels added (info, remote, error, success, debug)

colorize log output added (can be disabled)

more credits added in about dialog

dcop interface added. it provides the following functions:

QString getVersion()

void doConnect()

void doDisconnect()

uint getConnectedTime()

QString getStatus()

QString getCurrentProfile()

void setProfile(QString profilename)

void createNewProfile()

void deleteCurrentProfile()

void openPreferences()

void doImportCert()

void doImportPcf()

QStringList profiles()

void doQuit()

user notification for sucessful connect/disconnect added

option for adding default route (PPTP) added

option for replacing default route (PPTP) added

profile manager tool button now shown by default in toolbar

execution of own shell commands after connect/disconnect added. Use with caution.

bsd compression option for PPTP added

deflate option for PPTP added

network routing for special network for PPTP added

better connection status added

deleteing/keeping of generated files added.

deleting profile dialog fixed. Thank to Ruben Jenster who has found the bug ;)

renaming of profiles added

checking of /dev/net/tun and creating missing device entry added

disconnect script for vpnc fixed, thanks to Anders Damm and Mark Alleyne

password dialog for entering not saved passwords at connect (vpnc/pptp)

crash fixed at disconnect

UI fixes

PPTP support added

NAT-T support for racoon added

option for userdefinied UDP port added (racoon, vpnc)

option for UDP port added (racoon, vpnc)

option for UDP added (racoon, vpnc)

Version 0.5.1

crash at preferences dialog fixed. thank to Laurent Montel who has it provided.

patch to "includemoc" added, thanks to Laurent Montel who has it provided

Version 0.5

startup fixed: log file cant be open, thanks to Robyn L. King

better organization of profile widget

debug option for kvpnc

ping host IP after connection is established

profilemanager

vpnc-connect/vpnc-disconnect now obsolete: kvpnc handles required actions

vpnc will now directly called and set route

output reading fixed

connection time fixed

profiles tab moved to own widget class for multiple linstances

profile settings moved to preferences dialog

support for IPSec (freeswan/raccon)

certificate (X.509) support

certimport: freeswan/racoon

certimport: PCKS12 transformation to PEM using openssl (X.509 certificate)

special remote X.509 ID possible

PSK support

firewall rules (iptables) are set for freeswan/racoon

KDE 3.1.x build fixes

import of Cisco pcf profile file

storing of size and position from mainwindow

handbook (in progress)

Chinese translation. thanks to He Shi Jun and Marius Pacha who have done it.

Version 0.4.1

Startup fixed: log file cant be open. thanks to Robyn L. King

Crash fixed if no profile exists and advanced settings clicked

KDE desktop link updated

Profile actions moved to profile menu

Version 0.4

bulgarian translation added. thanks to Atanas D. which has done

dutch translation added. thanks to Luk De Ketelaere which has done it

advanced options added:

single DES

userdefinied (NT-) Domain name for authentication

userdefinied application version

IKE DH Group

userdefinied local port

use of global IPSec secret

Perfect Forward Secrecy

slovak translation added. thanks to Tomas Olah which has done it

help window with helpful information added

whats this tipps added

hungary translation added. thanks to Karoly Barcza which has done it

logging to file added

if user has entered data into fields and dont save it as profile and want quit -> question

italian translation added. thanks to Lapo Luchini which has done it

wrong parsing stderr fixed

duration time status added

looking for vpnc/vpnc-connect/vpnc-disconnect in /usr/bin added

userdefinied path for vpnc

vpnc debug level option added

if running vpnc found (old process or not from kvpnc) kvpnc kill it and try again

polish translation added. thanks to Witek Strzelczyk which has done it

spanish translation added. thanks to Juanjo Alvarez Martinez which has done it

Version 0.3

password storing for group and user password separated

multiple connection profiles added

quit question added if connection still established

more infos for statusbar added

Version 0.2

tooltip for dock added (connection status)

userdefinied connect timeout added

detection of unreachable network added

show/hide debug console changes after closing settings window

connect/disconnect works now from kicker menu/menu bar

detection of vpnc-connect/vpnc-disconnect added

connect status is now shown in status bar

detection of unknown host added

detection of no resonse added

detection of failed tunnel interface initalising

bugfixes

Version 0.1

initial release