KVpnc - KDE frontend for various VPN clients ::: Changelog

nt domain name fixed for pptp

keeping default route on pptp fixed

setting route to vpn server if replace default route fixed

removing additional network routes fixed

connection hangs because no data from management interface was recieved fixed on openvpn

openvpn resolv.conf handling fixed

crash at logviewer dialog fixed

crash at kde shutdown fixed

displaying username in connection status fixed

crash on pptp disconnect fixed

empty pfs fixed (vpnc)

empty dh group fixed (vpnc)

resolv.conf corruption on connecting fixed (pptp)

openvpn smartcard fixes

better vtun error handling

profile saving fixed if profilemanger called

better information for the user at profile saving

resolv.conf restore on openvpn fixed

danish translation added. Thanks to Christiansen for made it.

vpnc disconnect fixed

natt mode none removed from cisco settings (obsolete)

tooltip for natt mode in cisco settings fixed

virtual ip on tap mode for openvpn fixed

tunneldevice type change fixed if virtual ip is disabled

disable tail for freeswan because it doesnt support plutostderrlog

first connect doesnt work fixed (bug #9977)

my_identifier option for racoon added

freeswan/openswan/strongswan config import added

bash test added

use /bin/bash as shell interpreter

export profiles and global settings added

import profiles and global settings added

special chars now replaced with underscore in profile import

cpu usage reduced by improoved duration event

15€ donation credits added, Andreas Diestelmann

30$ donation credits added, thanks to Frank Visconti

patch for setting DNS_UPDATE applied (thanks to Igor Bujna)

restoring route and resolv.conf on connecting state fixed (vpnc)

path for pptp fixed

disable nat-t for vpnc >= 0.4.x fixed

pcf import fixed (udp port)

process environment fixed

local ip address of tunnel is now right shown (pptp)

pptp route problem fixed

pptp is now right terminating

adding/removing additional network routes are now right shown in log

resolv.conf/resolvconf fixes

setting english as environment for processes

virtual ip check in preferencesdialog fixed

xl2tpd detection fixed

ipsec log parsing fixed

vpnc 0.3.2 is working again

removing password entry from pap-secrets/chap-secrets file fixed

psk in file fixed

virtual ip in preferences dialog fixed (openvpn)

reconnect delay fixed

virtual ip entry fixed (openvpn)

cancel at user data dialog fixed

save only profiles after dialog if needed (openvpn)

tunnel interface now better regonized (openvpn)

the network interface now can be manually typed in at addroutedialog

close event for kicker implemented

toolinfo dialog now shows what tool is required on vpn types

extra route for gateway added (pptp)

option for fixing the path mtu problem added (http://pptpclient.sourceforge.net/howto-diagnosis.phtml#connections_freeze)

support for propritary (original) cisco client added

certificate support for vpnclient added

- cert file import

- cisco cert store management

- online certificate request via SCEP

certificate support for original cisco client added

certificate manager for original cisco client added

context menu on route listview added

authentication algorithm now by default disabled (openvpn)

better user info at openvpn

disableDataEncryption for vpnx 0.5.x added

basic support for vtun added

profile import improved

colored log output in logviewer

option for count of lines in logviewer added

searching in logviewer content added

progress bar at loading logfile on logviewer added

debug console now usees qtextbrowser instead qtextedit

pptp debug level renamed to log level

pptp debug option added

virtual ip option in newprofile wizard added

virtual ip option for pptp added

mru settings in network general settings added (for pptp)

mtu and mru settings in network settings at newprofile wizard added

default value for mtu and mru in newprofile wizard changed to 1492

l2tpd parsing enhanced

debug option for l2tpd added

debug option for xl2tpd added

option for selecting natt mode for cisco (vpnc) added

listen detection of already used port improoved

better error reporting at already used port for openvpn

save username, password and psk in enterpassworddialog reworked

pfs and dh group settings moved from advanced settings dialog to cisco and racoon settings

application version and single des option moved to cisco settings

profile saveing time improved

new reject message from vpnc 0.5.0 will now regonized

option for openvpn auth direction added

additional network route can now be modified

made test of replacedefaultroute more reliable

option for userdefinied dns search domain added (pptp)

support for x2ltpd added

x2ltpd will be used if availiable instead of l2tpd

duration in tooltip added

debug output for vpnc config added (if loglevel > 3)

empty ID will now reported and stops connecting (vpnc)

requiremppe128 detection for pppd added

openvpn private key password fixed

private key password dialog fixed

connection time counter fixed

crash at pcf import fixed

ifconfig entry for virtual ip in openvpn config fixed (thanks to Michal Pena)

nt domain name fixed in wizard and profile setting

fix for vpnc 0.4.0 which has changed udp option

openvpn import now copy cert files to kvpnc data dir if not absolute path is given

option for delay before executing command after connect added

tunnel device type selection moved from openvpn options to network general settings

tunnel device type selection for vpnc >= 0.4.0 added

authorization method added: pap (pptp)

connection timeout fixed (cisco)

vpnc-script fix for fc6

tool detection fixed

openvpn import fixes

crash at failed port binding for openvpn management port fixed

vpnc detection fixed

connection status check fixed

racoon fixes

openswan fixes

various small fixes

menu entry for donate money now works if run via kdesu

certificate import fixes

crash on connecting state of racoon fixed

credits for swedish, japanese translators, artworker and bughunter added

on timeout now the user got hints on a messagebox

on profile rename the user can enter new name again after failed because illegal chars entered

if peer uses another cipher and reports that, kvpnc automaticlly fix it (openvpn)

cert and psk settings are spit in seperate widgets

preferences dialog reworked for smaller size

http proxy is now splitted from openvpn settings

pkcs11-tool added to helper programs

user data can now entered at wizard (cisco)

option to change background color for debug console added

kvpnc now only asks for passphrase if private key is protected with a passphrase

openvpn import now asks for username and password if auth is requested in import file

if peer uses another tunnel type (tun/tap) and reports that, kvpnc automaticlly fix it (openvpn)

if peer uses another authentication algorithm and reports that, kvpnc automaticlly fix it (openvpn)

better freeswan/openswan/strongswan detection

kvpnc now shows the ipsec type (openswan, strongswan, freeswan)

float option for allowing change of peers ip address added (openvpn)

default authentication algorithm is now set to MD5 (openvpn)

option for hide at startup added

automatic backup of kvpnc config added

automatic restore of network routes, resolv.conf and config added

smartcard support added

options for authentication and encryption algorithms added (racoon)

l2tp support added

menu entry for reporting bugs added

feedback mail report added

option for authentication algorithm added (openvpn)

option for killing still running racoon (if not from kvpnc started) added

option for killing still running l2tpd (if not from kvpnc started) added

default route option now moved to network - route

dcop functions added:

disable of getting dns from peer now works (pptp)

path for pkcs12 file on certificate import within the wizard fixed

pptp fixes

chap-secrets will now be cleaned up rightly

if specified, special path for external programs will be now used

pcf import crash fixed

vpnc will now right killed at disconnect

openvpn import now moves cert files to right place

openvpn now works if only a ca cert is set

terminating openvpn process no only kills the from kvpnc started

profile selection now works in all profile settings

NT Domain name for authentication added (pptp)

support for missing replacedefaultroute at old pppd added

userdefinied mtu for cisco added

support for ca cert and user authentication (openvpn)

changed info for daemon programs will now shown directly after change

Japanese translation added. Thanks to Yukiko Bando who has made it

http proxy auth for openvpn added

restoring default route at cisco connection fixed

typo fix for openvpn tunnel device type

comments are now removed from config lines on openvpn import

crash at rename fixed

pcf import fixed

resolv.conf restore problem fixed (vpnc)

vpnc config is now send via stdin

openswan detection fixed

crash on close if 'don't quit by clicking close button' is enabled

cancellation of openvpn profile import fixed

cancellation of pcf file import fixed

disabling udp now sets right option for vpnc

crash on disconnect fixed

openvpn import fixes

small pptp fixes

displaying ip address in tooltip of kicker icon fixed (openvpn)

openvpn certificate search path is now /etc/openvpn if not specified

connection time will now counted correctly after reconnect

pptp debug level fixed

fixed name in pcf import

pcf import now reads pcf files which contain ! at beginning

credit for Marcin Prejsnar added

openvpn now controlled via management interface

dns names are now resolved by libresolv instead of qdns

network interface class use much less qprocess for better event handling and better speed

program and pid detection for given port added

kvpnc gives now a hint which program is using listening port if port bindung failed

support for xauth interactive added

openvpn pkcs11 support (thanks to Alon Bar-Lev)

dcop options added: doImportPcf(QString file), doImportOpenvpnConfig(QString file)

command line parameters added: --openvpnimport, --ciscoimport

option for disabling ccp negotiation added

vpnc will now used in non interactive mode because reading from console is broken in vpnc

vpnc script generation fixed

libcrypt detection fixed

vpnc output parsing fixed

option for peer timeout added

pcf import now uses peer timeout

debug output of kvpnc > 1 shows now the vpnc arguments

log file is now synchronized written

copy action for debug output added

process handling improved

userdefinied packet size added (openvpn)

userdefinied packet size for fragmentation added (openvpn)

network interface handling improved

ipsec.conf and ipsec.secrets will no longer overwritten

back behavior in newprofile wizard fixed

aggressive mode fixed (freeswan)

psk for freeswan fixed

starting connection after setup fixed

resolv.conf will no longer changed if no nameserver is retrieved/entered (pptp)

additional network routes fixed

disabling kwallet fixed

crash at close on empty profile list fixed

openvpn hangs on connecting fixed

window size and position storing fixed

hide on close warning dialog fixed

directory mode for certificate path in new profile dialog fixed

tab sort order dialogs fixed

udp option in preferences dialog for openvpn fixed

tls auth in newprofile wizard fixed

path for p12 certificate at openvpn import fixed

displaying certificate entries in profile manager fixed

password dialog for openvpn fixed

push options for openvpn fixed

connection status check options for openvpn fixed

some fixes around newprofile wizard

vpnc connect script fixed if no resolconf is used

openvpn user authentication fixed

*.crt for filter added

openvpn now looks in cert path for certificates

option for disabling pfs added (freeswan)

verbose option for ipsec added

automatic detection for ipsec.* files added

automatic killing ipsec if not started from kvpnc at connect

tunnel ip now shown for pptp and openvpn

option for left and right next hop added (freeswan)

option for disabling opportunistic encryption added (freeswan)

patch for skip focus to password if username already cached (thanks to Tim Wootton) added

name will now checked if profile from wizard was imported

agressive mode for freeswan/openswan added

info that process was killed is shown multiple times fixed

key shortcut menu entry fixed

more ui freezes eleminated

remote network storing fixed (pptp, OpenVPN)

crash at preferencesdialog after deleting profile in it fixed

retrieving username and password from enterpassworddialog fixed

output for connection status check fixed if userdefined ip address is used

wizard for creating new profile added

support for TLS remote host for openvpn added

support for pushed options (dns, domain) for openvpn added

ping IP address after connect (obsolete) removed

use userdefinied ip address for connection status check added

delay for auto reconnect added

patch for splitrules applied (thanks to Tilman Vogel)

auth retry after failed password for openvpn added

keep default route for pptp added

ike exchange mode for racoon added

option for dont save username added

openvpn config file import added

new dcop functions

virtual ip fixes (OpenVPN)

duplicate settings entry removed

non profile related entries moved to kvpnc menu

GUI fixes in preferencesdialog

crash at profilemanger if profile list is empty fixed

refuse eap option fixed

PPTP handling fixed. thanks to E-SpArK

command execution fixed

usenoipdefault fixed

certificate import for DER format fixed

group password in enterpassworddialog fixed

quit at dock fixed

crash at disconnect fixed

last profile fixed if profile list is empty

tunnel IP address in tooltip fixed (vpnc)

helper tools info now shown in helper tools settings

german translation at eventsrc added

ping test now only started if not running

preserving at startup and restoring at quit for /etc/resolv.conf added

preserving at startup and restoring at quit of default route added

toolinfo now collects info about ip, ifconfig, route

OpenVPN user authentication added

handling for fixing multiple default routes added

network tests added

group password in enterpassworddialog fixed

if password is empty after import saving password now disabled

quit at dock fixed

default value for keeping default route changed to false

crash at disconnect fixed

last profile fixed if profile list is empty

tunnel ip in tooltip fixed (vpnc)

config file corruption fixed

refuse eap option non-action fixed, thanks to loic pfefferkorn

internal cisco decoder added. thanks to hal9000

missing ui file added

pcf import gives a warning if vpnc is not installed

automaticlly loading kernel modules (esp4 and ah4) for racoon added

handbook updated

translations updated

more tooltips and whatsthis tips

option for disabling lzo compression on openvpn added

kvpnc hangs on pcf import fixed

fixes around delete profiles

better status for actions

crash at closing preferences dialog fixed if profile list is empty

profile renaming now forbids blanks in new name

profile list for autoconnect after profile renaming fixed

quick connect menu after rename profiles fixed

actions now disabled during connecting/connected: import pcf, import cert, add, delete

decoding group password for pcf import fixed

import ikegroup and local port from pcf file fixed

debian related changes - thanks to Loic Pefferkorn

tool detection and enabling connect fixed

vpnc script creation fixed

desktop link updated - thanks to Loic Pefferkorn

connect button now enabled at startup

crash at rename fixed

remote network in new profile dialog for pptp fixed

rename and delete of profiles fixed

ping ip after connect fixed

size of toolinfo dialog fixed

setting hostname as gateway fixed

executable not found if there still exists fixed

default mppe options for pptp fixed

racoon detection fixed

retrieving interface address fixed

parsing racoon output fixed

nat-t for racoon fixed

cert import fixed

more credits added in about dialog

automaticlly loading kernel modules (esp4 and ah4) for racoon added

more tooltips and whatsthis tips added

option for disabling lzo compression on openvpn added

openvpn key generation added

dcop function added: toolinfo (returns information of external tools)

connection status check added

auto reconnect after connection lost added

catalan translation added. Thanks to Marc Serra Romero who has done it

support for explicit nsCertType added

profile manager shown after pcf import

check for empty gateway at connect time added

description of profile added

option for saving username, psk and password from enter username+password dialog added

save user password will be checked if password is given in user password field at new profile dialog

save group password will be checked if group password is given in group password field at new profile dialog

import nat setting from pcf file added

option for keeping default route on vpnc use added

special remote id for racoon added

remote network route over gateway added

preferences & profile manager dialog redesigned for better usability

userdefinied port for openvpn added

toolinfo now looks into userspecified path and shows info if it if found

handbook updates

detection for first time use of kwallet added, now reading from config file in this case

tun/tap selection for openvpn added

password storing by use of kwallet added

check for certificate file added

all errors shown by dialogbox now written to log file

name resolving for raccon added

debug output font size can now be set

connecting stops now if required tool was not found

workaround for vpnc 0.3.x if /etc/vpnc/default.conf exits

default values for new profiles fixed

processing "ip route" output with fix_ip_get_output fixed (thanks to Sebastian Frei)

arguments for connecting msg fixed (thanks to Witek Strzelczyk)

vpnc settings not save in profile widget fixed

saving of use udp protocol fixed

slot for UDP port in profile dialog fixed

port range for NAT-T fixed

kernel module name for loading renamed from 'ppp_mppe_mppc' to 'ppp-compress-18' (ppp_mppe_mppc is an alias for it)

FreeS/WAN 2.x conf generation fixed (obsolete options no longer used)

getdefaultinterface(), getinterfaceip() and getinterfaceforip() fixed

kvpnc debug level fixed

getdefaultnetworkdevice fixed

various fixes around debug output

resolv.conf handling for vpnc fixed

vpnc: fix DNS support in generated scripts (look vpnc patch)

nat-t for racoon fixed

storing of command execution setting fixed

parsing of vpnc output now regnonize wrong group password

reconnect if password, username or group password failed by showing enter account data dialog added

special chars on description from pcf profile will now replaced and simplified to '_'

if username is empty it will also requested by calling dialog

FreeS/WAN conf generation now set from installed version

limited log viewer added

translation updates

all dialogs now use KDialogbase

tool checking added

tool info dialog added

disabling connect button and connect action if bin not found

retrieve dns servers from peer for PPTP added

special userdefinied server certificate option added (FreeS/WAN)

displaying tunnel IP address in tooltip for vpnc added

additional network routes added

ping test for openvpn added

connection type now shown in tooltip and status msg

connecting can now brake

ca certificate field for openvpn added (pem format)

X.509 certificate support for OpenVPN added

option for CA cert in DER format added

global settings moved to config class

NAT-T option moved to network tab in profile manager

the obsolete group password has been removed (preshared key fields will now used)

reorganized profile manager

better gui status for connected

after disconnecting pptp /etc/resolv.conf is will now be restored

automaticlly resolve hostname of gateway (vpnc, freeswan)

support for replace default route for pppd (pppd = 2.4.2) added

connecting can now brake

tool button for debug console added

russian translation added

support for Debian resolv.conf added (vpnc)

option for mtu size of ppp connection added.

import pcf file fixed

connect action now disabled if now profile list is empty

pptp: own dns server fixed

pptp: usepeerdns option fixed

If no profile exists all option which are not nessesary are now disabled

displaying connection time in nicer form: 00:00:00

KVpnc data diretory creation fixed

kicker menu entries resorted

icons for connect/disconnect/disconnected status changed (but still better icons wanted)

log levels added (info, remote, error, success, debug)

colorize log output added (can be disabled)

more credits added in about dialog

dcop interface added. it provides the following functions:


                                            QString getVersion()


                                            void doConnect()


                                            void doDisconnect()


                                            uint getConnectedTime()


                                            QString getStatus()


                                            QString getCurrentProfile()


                                            void setProfile(QString profilename)


                                            void createNewProfile()


                                            void deleteCurrentProfile()


                                            void openPreferences()


                                            void doImportCert()


                                            void doImportPcf()


                                            QStringList profiles()


                                            void doQuit()

crash at preferences dialog fixed. thank to Laurent Montel who has it provided.

patch to "includemoc" added, thanks to Laurent Montel who has it provided

startup fixed: log file cant be open, thanks to Robyn L. King

better organization of profile widget

debug option for kvpnc

ping host IP after connection is established

profilemanager

vpnc-connect/vpnc-disconnect now obsolete: kvpnc handles required actions

vpnc will now directly called and set route

output reading fixed

connection time fixed

profiles tab moved to own widget class for multiple linstances

profile settings moved to preferences dialog

support for IPSec (freeswan/raccon)

certimport: freeswan/racoon

certimport: PCKS12 transformation to PEM using openssl (X.509 certificate)

special remote X.509 ID possible

Startup fixed: log file cant be open. thanks to Robyn L. King

Crash fixed if no profile exists and advanced settings clicked

KDE desktop link updated

Profile actions moved to profile menu

bulgarian translation added. thanks to Atanas D. which has done

dutch translation added. thanks to Luk De Ketelaere which has done it

advanced options added:

single DES

userdefinied (NT-) Domain name for authentication

userdefinied application version

IKE DH Group

userdefinied local port

use of global IPSec secret

Perfect Forward Secrecy

password storing for group and user password separated

multiple connection profiles added

quit question added if connection still established

more infos for statusbar added

tooltip for dock added (connection status)

userdefinied connect timeout added

detection of unreachable network added

show/hide debug console changes after closing settings window

connect/disconnect works now from kicker menu/menu bar

detection of vpnc-connect/vpnc-disconnect added

connect status is now shown in status bar

detection of unknown host added

detection of no resonse added

detection of failed tunnel interface initalising

bugfixes

	Main page
	News
	About
	Features
	Screenshot
	Download
	ChangeLog
	Documentation
	FAQ
	Communication
	Contact
	Links
	Donate